16 May 74

Posted at 23:30h in Technical Soporte by
0 Likes

Symptom: DXF-19, DXH-19, MGC-19 – ERROR CODE P2

Solution: MULTIPLE SOLUTIONS

Cause: HIGH TEMPERATURE PROTECTION OF IPM MODULE

Remarks:

DESCRIPTION:

IF THE TEMPERATURE OF THE IPM MODULE IS HIGHER THAN SETTING VALUE, THE LED DISPLAYS THIS FAILURE CODE.

REPAIR:

1) CHECK THE FASTENING SCREWS ON THE PCB AND IPM RADIATOR:

ARE THEY FIXED TIGHTLY?

NO = TIGHTEN THE SCREWS AND APPLY SILICON GREASE
YES = REPLACE THE OUTDOOR CONTROL PCB