*AC UNIT IN COOLING/DRY MODE: ALL LOADS WILL STOP, EXCEPT THE INDOOR FAN THAT WILL CONTINUE TO OPERATE.
*AC UNIT IN HEATING MODE: THE COMPLETE UNIT STOPS OPERATION.
REPAIR:
1) IMPROPER INPUT VOLTAGE:
SOLUTION 1) CHECK IF THE VOLTAGE IS TOO LOW. IF YES, PLEASE ADJUST IT
2) EVAPORATOR OR CONDENSER IS DIRTY:
SOLUTION 2) CHECK IF THE EVAPORATOR AND CONDENSER ARE DIRTY. IF YES, PLEASE CLEAN IT
3) REFRIGERANT IS EXCESSIVE:
SOLUTION 3) CHECK IF THE REFRIGERANT IS EXCESSIVE OR NOT
4) OUTDOOR OR INDOOR TEMPERATURE SENSOR IS NOT OK:
SOLUTION 4) CHECK IF BOTH TEMPERATURE SENSORS ARE OK OR NOT
5) DEFECT OF OUTDOOR UNIT CONTROLLER:
SOLUTION 5) REPLACE WITH A NEW CORRESPONDING PCB OF OUTDOOR UNIT
6) DEFECT OF THE COMPRESSOR:
SOLUTION 6) REPLACE WITH A NEW CORRESPONDING COMPRESSOR